Rich Solar BRAVO 30 12/24V 30A MPPT Solar Charge Controller
- 12/24 V auto system
- 30-39 A charging
- 2-year warranty
SVT Score, Mid
A 30 A MPPT charge controller for 12 V or 24 V banks with built-in Bluetooth, a 100 V PV limit, eight battery presets and a custom lithium mode.
$140
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
4.8 out of 10Strengths
- Phone monitoring built in
- High rated conversion efficiency
- Custom charge settings for lithium
- Auto-detects system voltage
- Conformal-coated circuit board
- Compact and light
Drawbacks
- Short warrantyprorated in year two
- No load output
- Temperature sensor costs extra
- Low PV voltage ceiling
- Indoor mounting only
Specs
- CapacityNot applicable
- AC OutputNot applicable
- System Voltage12/24 V auto
- Panel PowerNot applicable
- Charge Current30-39 A
- Safety ListingRecognized component only
- Cell TypeNot applicable
- Low-Temp ChargingNot applicable
- Warranty2 Years
- MonitoringBluetooth built in
- Weight1.8 lb
At a glance
- 7.0 x 5.5 x 2.9 in
- LCD with LED charge bar
- Remote meter port
- Terminals rated 50 A
Rich Solar is the brand of Rich Solar Inc., which says it began in 2005 and keeps its offices and warehouse in Ontario, California.
It sells with a cart at richsolar.com, through a RICH SOLAR Amazon brand store run by the seller SUNRICH ENERGY, on Walmart, and through dealers such as Outbound Power.
The Rich Solar BRAVO 30, model RS-MPPT30PB, is a 30 A MPPT solar charge controller that auto-detects a 12 V or 24 V battery bank. It takes up to 100 V of PV open-circuit voltage and tracks between 15 and 72 V, with 500 W of panels recommended at 12 V and 1,000 W at 24 V.
Rich Solar rates conversion efficiency at up to 98 percent and MPPT tracking at 99.5 percent or better. It has eight battery presets (Gel, AGM, flooded, crystal, calcium, LiFePO4, LTO and LCO) plus a custom mode, an LCD with an LED bar, and built-in Bluetooth for the Rich Solar app.
Ports take an optional remote meter and an optional battery temperature sensor, and there is no load output. The board is conformal coated and rated IP43, with IP22 at the connection area, for indoor surface mounting. It measures 7.0 x 5.5 x 2.9 in and weighs 1.8 lb (1.76 lb, 0.8 kg, in the manual).
The manual lists 12 mA of self-consumption from the battery with PV disconnected and terminals rated for 50 A.
Questions answered from our data

Is Rich Solar good?We list 46 Rich Solar products and score 45 of them. Their overall scores run from 3.9 to 6.1, with a median of 5.1, against a median of 5.4 for all 181 products we score.
How much does an MPPT charge controller cost?The 23 MPPT charge controllers we list run from $90 to $702, with a median of $200.
Are MPPT charge controllers UL listed?Two of the 23 MPPT charge controllers we list carry a UL 1741-type listing we could look up by model.
Which MPPT charge controllers have Bluetooth?21 of the 23 MPPT charge controllers we list offer Bluetooth monitoring, built in or as the maker's add-on.









