Renogy REGO 12V 60A MPPT Solar Charge Controller
SVT Score, Top
A 12 V, 60 A MPPT controller for up to 800 W of solar and 100 V open-circuit, with built-in Bluetooth, RV-C and Anderson terminals.
$470
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
7.4 out of 10It suits a 12 V RV or van owner building on Renogy's REGO system who wants up to 800 W of solar into one controller with phone and RV-C monitoring, and who will not need a 24 V bank or a panel string above 100 V. $469.99 at renogy.com.
Strengths
- 60 A from up to 800 W of solar on a 12 V bank
- Bluetooth built inwith RV-C and Modbus
- Temperature sensor includedby the product page
- Self-consumption of 0.5 W or less
- Conversion efficiency up to 98 percent on Renogy's datasheet
Drawbacks
- 100 V PV open-circuit limit
- 12 V batteries only
- A non-REGO battery needs an Anderson-to-ring cablesold separately
- Renogy's 2025 G2 manual puts efficiency at about 92 to 95 percent, under the datasheet's 98
- No load output terminals
Specs
- CapacityNot applicable
- AC OutputNot applicable
- System Voltage12 V
- Panel PowerNot applicable
- Charge Current60-79 A
- Safety ListingCSA 107.1 listed, UL 1741 listed
- Cell TypeNot applicable
- Low-Temp ChargingNot applicable
- Warranty5 Years
- MonitoringBluetooth built in
- Weight5.1 lb
At a glance
- Anderson PP75 terminals
- Anderson-to-MC4 solar lead
- 9.43 x 7.36 x 4.28 in
- 5 ft or 10 ft cable bundles
Renogy is the brand of RNG International, Inc., of Ontario, California, which Dr. Yi Li founded in 2010.
It sells direct from renogy.com and its Amazon and eBay brand stores, and through Home Depot, Lowe's, Best Buy, Camping World and Walmart's marketplace.
The Renogy REGO 12V 60A (RCC60REGO) is a 12 V-only MPPT solar charge controller rated 60 A, for batteries from 10 to 16 V. It accepts up to 800 W of solar over a 15 to 100 V MPPT window, 100 V open-circuit and 50 A short-circuit current, and limits power at 800 W. Renogy's datasheet rates MPPT tracking above 99 percent and conversion efficiency up to 98 percent; the 2025 G2 manual describes efficiency of about 92 to 95 percent. Self-consumption is 0.5 W or less. Battery modes are AGM/sealed, gel, flooded, LiFePO4 and a user mode programmed through the Renogy app. Bluetooth is built in, with RV-C and Modbus communication, a CAN port for the Renogy ONE Core (adapter cable sold separately), and Renogy's BT-2 module listed as an RS485/CAN option. Battery and solar connections are Anderson PP75 terminals; a non-REGO battery needs an Anderson-to-ring terminal cable, sold separately. It is rated to operate from -4 °F to 140 °F (-20 °C to 60 °C), measures 9.43 x 7.36 x 4.28 in (239.4 x 187 x 108.8 mm) and weighs 5.07 lb by the product page. The product page lists the controller, a temperature sensor, an Anderson-to-MC4 solar adapter cable and four mounting screws in the box. Renogy's warranty document lists it at 5 years for materials and workmanship. Renogy also sells it with a 5 ft or 10 ft 6 AWG Anderson adapter cable at $617.99.
Questions answered from our data

Is Renogy good?We list 58 Renogy products and score 58 of them. Their overall scores run from 3.7 to 6.6, with a median of 5.4, against a median of 5.4 for all 58 products we score.
How much does an MPPT charge controller cost?The 8 MPPT charge controllers we list run from $90 to $702, with a median of $325.
Are MPPT charge controllers UL listed?Two of the 8 MPPT charge controllers we list carry a UL 1741-type listing we could look up by model.
Which MPPT charge controllers have Bluetooth?Eight of the 8 MPPT charge controllers we list offer Bluetooth monitoring, built in or as the maker's add-on.

