Kind Water Systems WS-PHN Smart Metered pH Neutralizing Filter
Calcite neutralisation for acidic well water, with NSF/ANSI 60 certified media and 3 to 6 month top-ups.
$1,882
Usability
The WS-PHN addresses a problem most whole-house systems ignore entirely: acidic water below pH 7 that dissolves copper, leaves blue-green staining in sinks and eventually causes pinhole leaks. Its strongest attribute is the media certification, NSF/ANSI 60 for drinking water treatment chemicals, which is a genuine performance-relevant listing rather than the materials-only certifications the rest of the range carries, and Kind is specific about the target range at roughly 6.9 to 7.2. The calcite is high-purity crushed marble, metered backwash keeps waste down, and it is one of the cheaper tank systems in the catalogue. Its weakest attribute is that calcite is sacrificial and dissolves as it works, so the bed needs replenishing every three to six months depending on inlet pH and usage, which is a recurring cost and a physical job most owners of tank systems are not expecting. Neutralisation also raises hardness as a side effect, because calcium carbonate is going into the water by design, so a household with existing hardness may need a softener downstream that this system does not include. There is no filtration beyond the sediment pre-filter and no chlorine or iron capability. The trade is single-purpose scope and ongoing media top-ups for a properly certified fix to corrosive water.
- Media certified to NSF/ANSI 60 for drinking water treatment chemicals, a performance-relevant listing
- High-purity crushed white marble calcite rather than a proprietary blend
- Kind publishes the target outlet range of roughly 6.9 to 7.2
- Smart View Meter backwashes on measured usage rather than a timer
- One of the lower-priced tank systems in the range
- Lifetime limited warranty plus a 120-day satisfaction guarantee
- Calcite is consumed as it works and needs replenishing every 3 to 6 months
- Neutralisation adds hardness to the water as a by-product, which may require a softener downstream
- No chlorine, iron or organic reduction beyond the sediment pre-filter
- Requires a drain connection and floor space for backwash
- Only useful on water with an inlet pH between about 5.8 and 7.0
The WS-PHN treats acidic well water using a calcite bed of crushed white marble, raising pH from an inlet range of 5.8 to 7.0 up to roughly 6.9 to 7.2. The media is certified to NSF/ANSI 60 as a drinking water treatment chemical, and the tank hardware to NSF/ANSI 61 and 372. It measures 53 by 24 by 15 inches, runs 12 GPM on 1 in NPT and backwashes on measured usage via the Smart View Meter. Calcite is sacrificial and needs topping up every three to six months.
Additional information
Specification: Kind Water Systems WS-PHN Smart Metered pH Neutralizing Filter
| Water Filtration Specifications | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||
| General Specifications | ||||||||||||||
|
||||||||||||||
There are no reviews yet.