
Battle Born 100Ah 12V LiFePO4 Battery
A 1,280 Wh, 12.8 V LiFePO4 drop-in for Group 27 and 31 trays with a sealed IP65 case, a 100 A BMS and a low-temperature charge cut-off.
$799
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
4.7 out of 10Strengths
- Usable to full depth
- Sealed case rated for water spray
- Flexible series and parallel wiring
- Long full-replacement period
- Drop-in for common lead-acid trays
Drawbacks
- Heavy for its capacity
- No charging below freezing
- No Bluetooth or comms port on this version
- Last warranty years only a discount
- Positive-terminal heating reports under dispute
- Owner pays freight on warranty returns
Specs
- Capacity1,000-1,499 Wh
- AC OutputNot applicable
- System Voltage12 V
- Panel PowerNot applicable
- Charge CurrentNot applicable
- Safety ListingUL 2054 listed
- Cell TypeNot applicable
- Low-Temp ChargingLow-temperature cut-off
- Warranty10 Years
- MonitoringNone
- Weight31.0 lb
At a glance
- 12.76 x 6.86 x 8.95 in
- Brass flag terminals
- Cylindrical cells
- Stainless bolt kit in box
- Battle Born Batteries is the brand of Dragonfly Energy Holdings Corp. of Reno, Nevada (Nasdaq: DFLI), a company founded in 2012.
- Dragonfly Energy acquired the Dakota Lithium brand's assets in July 2026 and runs that brand separately from Battle Born.
It sells with a cart at battlebornbatteries.com, through dealers and installers on its dealer locator, and on Amazon US, where Amazon.com sells its 100Ah battery.
The Battle Born BB10012 is a 12.8 V, 100 Ah LiFePO4 battery built from cylindrical cells, storing 1,280 Wh. Its BMS allows 100 A continuous discharge and 200 A for 30 seconds, with a maximum charge current of 50 A at 14.2 to 14.6 V and a 13.4 to 13.8 V float.
The manual gives charging at 32 to 131°F and discharging at -4 to 140°F, with a low-temperature charge cut-off and an IP65 case. It measures 12.76 x 6.86 x 8.95 in, weighs 31 lb and has brass flag terminals with a 3/8 in hole.
It wires up to four in series for 48 V and without limit in parallel, and the manual calls for a current surge limiter with inverters of 3,500 W or more. The box holds the battery and a finishing hardware kit: four 18-8 stainless 5/16-18 bolts (two 1 in, two 1-1/4 in), four washers and two Nylok nuts.
The same battery comes in a GC2 case (BBGC2, $799.00, 10.31 x 7.28 x 11.02 in), and as the Smart Bluetooth BB10012i and GC2 BBGC2i at $949.00 each.
