BlueCube C2 Stainless Cold Plunge Tub with End Deck
- 38-41°F minimum
- Up to 80 gal
- 0.8-1 HP chiller
- Heats to 100°F or more
SVT Score, Upper
A two-pump lay-down stainless cold plunge with a hardwood end deck, a 13,600 BTU/hr chiller and a heater, rated 41°F to 104°F.
$18,500
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
5.8 out of 10Strengths
- Marine-grade stainless tub
- Two pumps give a strong flow
- Chiller sized well above the tub volume
- Heater built in for warm soaks
- Automatic chlorine available as an upgrade
- Parts and labor warranty covers the whole system
Drawbacks
- Coldest setting stays in the low forties
- Its pages disagree on the coldest setting
- Needs its own dedicated outlet
- Very expensive for a home plunge
A polished two-pump stainless plunge for home, but it stops short of very cold
Specs
- TypeRigid
- HeaterNot applicable
- FormTub
- PlacementIndoor or outdoor
- SeatsNot applicable
- Max TemperatureNot applicable
- Min Temperature38-41°F
- Capacity (Gallons)Up to 80 gal
- Chiller0.8-1 HP
- HeatsHeats to 100°F or more
- Water CareFilter, Ozone
- Power Supply120V dedicated (20A)
- EMF ClaimedNot applicable
- EMF MeasuredNot applicable
- CertificationsNone verifiable
- Warranty3 Years
At a glance
- Walnut or maple end deck
- 66 in tub at same price
- Tilts through a doorway
BlueCube Wellness LLC of Redmond, Oregon, founded in 2019, builds cold plunge tubs from a 33-inch upright aluminum tub to a 72-inch stainless sit-in tub.
- It sells them in the US through its own store at bluecubebaths.com and ships each tub curbside in the lower 48 states.
- No BlueCube store or listing was found on Amazon US in November 2026.
The BlueCube C2 is a lay-down cold plunge with a 14-gauge 316-L stainless tub in a Line-X coated plywood cabinet and a hardwood end deck in walnut, mahogany or white maple. The 60 inch tub measures 60 by 24 by 22 inches inside with a 92.5 by 37.5 by 28.5 inch footprint; the 66 inch tub costs the same.
The current page rates it from 41°F to 104°F with a heater and a 13,600 BTU/hr (1.5 HP+) chiller; an older brand page lists 37°F to 70°F and a 1 HP chiller, and the brand FAQ puts the C-line at 80 to 100 gallons.
Two ¼ HP Iwaki pumps circulate the water through a 20 micron filter with automatic ozone, and an app and lights come standard. It needs a dedicated 120 V 20 A circuit or can be hardwired, and ships with a GFCI cord, an insulated cover with child locks and a maintenance kit.
The commercial package with a non-metal tub and chlorine dosing adds $4,500.00, a custom colour $2,500.00, reverse plumbing $2,000.00 and powder-coated screens $1,000.00.
Questions answered from our data

Is BlueCube good?We list five BlueCube products and score five of them. Their overall scores run from 5.5 to 6.2, with a median of 5.7, against a median of 5.3 for all 91 products we score.
How much does a cold plunge cost?The 62 cold plunges we list run from $549 to $28,880, with a median of $7,495.
How cold does a cold plunge get?32 of the 62 cold plunges we list are rated to hold water at 37°F or colder, as their makers rate them.
How many gallons is a cold plunge?30 of the 62 cold plunges we list hold more than 100 gallons, as their makers rate them.


