BlueCube C1 Stainless Cold Plunge Tub
- 38-41°F minimum
- Up to 80 gal
- 0.8-1 HP chiller
- Heats to 100°F or more
SVT Score, Top
A one-pump lay-down cold plunge in 316-L stainless with a 13,600 BTU/hr chiller and a heater, rated 41°F to 104°F.
$16,500
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
5.8 out of 10Strengths
- Marine-grade stainless tub
- Chiller sized well above the tub volume
- Heater built in for warm soaks
- App control comes standard
- Parts and labor warranty covers the whole system
Drawbacks
- Coldest setting stays in the low forties
- Needs its own dedicated outlet
- No automatic chlorine option
- Very expensive for a single-pump tub
- Its pages disagree on the coldest setting
Specs
- TypeRigid
- HeaterNot applicable
- FormTub
- PlacementIndoor or outdoor
- SeatsNot applicable
- Max TemperatureNot applicable
- Min Temperature38-41°F
- Capacity (Gallons)Up to 80 gal
- Chiller0.8-1 HP
- HeatsHeats to 100°F or more
- Water CareFilter, Ozone
- Power Supply120V dedicated (20A)
- EMF ClaimedNot applicable
- EMF MeasuredNot applicable
- CertificationsNone verifiable
- Warranty3 Years
At a glance
- Line-X coated cabinet
- Tilts through a doorway
- Uncladded finish at no cost
BlueCube Wellness LLC of Redmond, Oregon, founded in 2019, builds cold plunge tubs from a 33-inch upright aluminum tub to a 72-inch stainless sit-in tub.
- It sells them in the US through its own store at bluecubebaths.com and ships each tub curbside in the lower 48 states.
- No BlueCube store or listing was found on Amazon US in November 2026.
The BlueCube C1 is a lay-down cold plunge with a 14-gauge 316-L stainless tub, 60 by 24 by 22 inches inside, set in a Line-X coated plywood cabinet with spray-foam insulation. Its footprint is 92.5 by 37.5 by 28.5 inches, and the brand FAQ puts the C-line tubs at 80 to 100 gallons.
The current page rates it from 41°F to 104°F with a heater and a 13,600 BTU/hr (1.5 HP+) chiller that runs down to 20°F ambient; an older brand page lists 37°F to 70°F and a 1 HP chiller. One ¼ HP Iwaki pump circulates the water through a 20 micron filter with automatic ozone, and an app and lights come standard.
It needs a dedicated 120 V 20 A circuit or can be hardwired, and ships with a GFCI cord, an insulated cover with child locks and a maintenance kit.
Colours and an uncladded finish cost the same; a custom colour adds $2,500.00, a hardwood deck $4,000.00, a tub material upgrade $3,000.00, reverse plumbing $2,000.00 and powder-coated screens $1,000.00.
Questions answered from our data

Is BlueCube good?We list five BlueCube products and score five of them. Their overall scores run from 5.5 to 6.2, with a median of 5.7, against a median of 5.3 for all 91 products we score.
How much does a cold plunge cost?The 62 cold plunges we list run from $549 to $28,880, with a median of $7,495.
How cold does a cold plunge get?32 of the 62 cold plunges we list are rated to hold water at 37°F or colder, as their makers rate them.
How many gallons is a cold plunge?30 of the 62 cold plunges we list hold more than 100 gallons, as their makers rate them.


