APEC Water Systems IRON-HYDRO-10 Iron, Hydrogen Sulfide and Manganese Removal System
- Oxidation
- 5-10 GPM
- Filter life over 5 years
- 5-year warranty
SVT Score, Top
A manganese dioxide tank for iron, hydrogen sulfide and manganese on well water, with its pH and ORP limits published and media quoted at five years or more.
$1,500
We may earn a commission if you buy through this link. It never affects our scores. How this works
Usability
5.2 out of 10Strengths
- No chemicals or salt to add
- Working limits published in full
- Long warranty on the tank and bypass
- Years between media changes
- Removes ironsulfur smell and manganese
Drawbacks
- Well water must be tested for ORP first
- No certification of performance
- Heavy to move into place
- Low flow for a large household
- Needs a drain line and a power connection
A well-documented iron and sulfur filter for small homes, but test first
Specs
- Filtration TypeOxidation
- CertificationsNot certified
- Warranty5 Years
- Connection Size1 in
- Housing MaterialNot specified
- Flow Rate / Water Pressure5-10 GPM
- Filter Lifespan / CapacityOver 5 years
- Dimensions9 x 48 in (55 in with control head)
- Weight130 lb
- Country of OriginUSA
- Contaminant RemovalRustTaste and OdorTurbidityHydrogen SulfideIronManganese
At a glance
- Water-only regeneration
- 15 ft power cord
- Oxidizers welcome upstream
APEC Water Systems is the trading name of Advanced Purification Engineering Corp., a California corporation in City of Industry led by President and CEO Jason Liu.
APEC sells its reverse osmosis systems and its whole house media tanks on apecwater.com, on Amazon US and through Home Depot, Lowe's and Walmart.
The APEC Water Systems IRON-HYDRO-10 is a backwashing whole house oxidation filter on a 9 by 48 inch mineral tank (55 inches with the control head), charged with media of 75 to 85 percent manganese dioxide.
APEC states it handles up to 10 ppm iron, 3 ppm hydrogen sulfide and 5 ppm manganese without added oxidizers, at pH 5.0 to 9.0, and needs an oxidation reduction potential above negative 170 millivolts.
APEC lists a service flow of 5 gpm per cubic foot and headlines 5 gallons per minute for homes with one or two bathrooms, with a 5.3 gpm backwash at 60 degrees F. The system weighs 130 pounds and ships with a 1 inch MNPT bypass adapter and an electronic time clock valve on a 15 foot cord, and it needs a drain line.
It is sold as the base unit or with a fabric or a stainless steel coat; the stainless version was sold out on 2026-11-13.
Questions answered from our data

How much does a well water filter cost?The 35 well water filters we list run from $550 to $6,235, with a median of $2,230.
Do water filters remove iron?47 of the 296 systems we list claim to reduce iron.
Do water filters remove hydrogen sulfide?30 of the 296 systems we list claim to reduce hydrogen sulfide.


